USAGE
INSTRUCTIONS:
1. Start with a clean driveway, sweep all sand, rocks, dirt, etc. off the driveway.
2. If your driveway has cracks in it, you need to fill them with a crack filler.
3. Prepare your EZ-Sealer Residential Sealcoat Machine.
- Read your directions on your sealant container
- Stir or agitate your sealant until it is liquid, without any lumps
- When it is free of lumps, and mixed thoroughly, make sure strainer is in place in the tank. Pour sealant in tank, and you are ready to sealcoat your driveway.
4. How to use your EZ-Sealer Residential Sealcoat Machine.
- If your driveway has a slope or a hill in it, place your sealcoat machine so it is always facing uphill so sealant will not run away from you when you open the valve.
- Set your squeegee down, and open the valve for the fluid to flow. Leave a 2-3 inch flood of fluid down in front of squeegee. Move slowly up your driveway. 4 feet before you reach the end of your driveway, close the valve, let the fluid diminish so there is no puddle of fluid. Lift up squeegee, and return to where you started.